The PAX5400 Access Point is IP55 rated and may be installed outdoors in sheltered areas, such as beneath an eave.
• Mounting location should be at least 60 cm (2 ft) from the edge of the ceiling.
• Install Access Point with port bay facing downward.

Avoid open air installation fully exposed to direct sun light, rain and extreme weather conditions.

| Radio Chains / Streams | 2.4 GHz : 2x2 5 GHz : 2x2 6 GHz : 2x2 |
| Antennas | 2.4 GHz : 5.0 dBi 5 GHz : 5.0 dBi 6 GHz : 5.0 dBi |
| Data Rates | 573 Mbps + 2402 Mbps + 2402 Mbps |
| 2.4 GHz | 2 stream, 802.11 b/g/n/ax (max rate: 574 Mbps), MU-MIMO/OFDMA |
| 5 GHz | 2 stream, 802.11 a/n/ac/ax (max rate: 2402 Mbps), MU-MIMO/OFDMA |
| 6 GHz | 2 stream, 802.11 a/n/ac/ax (max rate: 2402 Mbps), MU-MIMO/OFDMA |
| Processor | Qualcomm Maple IPQ5018 |
| Memory | 1024 MB DRAM DDR3 64 MB NOR Flash |
| Hardware Watchdog | Yes |
| Physical Interface | 1x 2.5 Gbps Ethernet port 1x 1.0 Gbps Ethernet port |
| PoE | 802.3at |
| DC Jack | 12V / 2A |
| Power Consumption | Min : 5W (PoE), 3.5W (DC) Max : 27W |
| Max Recommended Clients | 300 per AP |
| Indoor/Outdoor Rating | IP55, dust and water resistant |
| Dimension (W x D x H) | 200 x 200 x 38 mm |
| Weight | 760 g |
| Operating Temperature | 0°C ~ 40°C (32°F ~ 104°F) |
| Certifications | CE, FCC, IC, RCM |
The PAX5400 Access Point is IP55 rated and may be installed outdoors in sheltered areas, such as beneath an eave.
• Mounting location should be at least 60 cm (2 ft) from the edge of the ceiling.
• Install Access Point with port bay facing downward.

Avoid open air installation fully exposed to direct sun light, rain and extreme weather conditions.

| Radio Chains / Streams | 2.4 GHz : 2×2 5 GHz : 2×2 6 GHz : 2×2 |
| Antennas | 2.4 GHz : 5.0 dBi 5 GHz : 5.0 dBi 6 GHz : 5.0 dBi |
| Data Rates | 573 Mbps + 2402 Mbps + 2402 Mbps |
| 2.4 GHz | 2 stream, 802.11 b/g/n/ax (max rate: 574 Mbps), MU-MIMO/OFDMA |
| 5 GHz | 2 stream, 802.11 a/n/ac/ax (max rate: 2402 Mbps), MU-MIMO/OFDMA |
| 6 GHz | 2 stream, 802.11 a/n/ac/ax (max rate: 2402 Mbps), MU-MIMO/OFDMA |
| Processor | Qualcomm Maple IPQ5018 |
| Memory | 1024 MB DRAM DDR3 64 MB NOR Flash |
| Hardware Watchdog | Yes |
| Physical Interface | 1x 2.5 Gbps Ethernet port 1x 1.0 Gbps Ethernet port |
| PoE | 802.3at |
| DC Jack | 12V / 2A |
| Power Consumption | Min : 5W (PoE), 3.5W (DC) Max : 27W |
| Max Recommended Clients | 300 per AP |
| Indoor/Outdoor Rating | IP55, dust and water resistant |
| Dimension (W x D x H) | 200 x 200 x 38 mm |
| Weight | 760 g |
| Operating Temperature | 0°C ~ 40°C (32°F ~ 104°F) |
| Certifications | CE, FCC, IC, RCM |