PAX1800 Access Point

  • Top picture of Plasma Cloud's PAX1800 WiFi 6 Access Point.

Key features:

  • 2.4 GHz 802.11ax and 5 GHz 802.11ax concurrent WiFi
  • Zero config, plug-and-play networking
  • Free cloud-based web console for complete management
  • Water and dust resistant with an IP55 rating
  • Universal installation kit included

  • PAX1800

    Plasma Cloud’s WiFi 6 universal solution for almost any setup. With dual band & dual stream 802.11ax WiFi in a compact weather resistant housing the PAX1800 may serve as office or hotel WiFi backbone, coffee shop hotspot and outdoor WiFi extension. It shines in high density and high throughput demand scenarios as well, such as in schools, universities, airports and shopping malls.
  • Power over Ethernet (PoE)

    Power over Ethernet (PoE) allows to supply a device with power and data over a single Ethernet cable connection. This reduces installation cost and effort for locations without available power lines. Furthermore, when connected to a Plasma Cloud PoE switch, PoE allows to centrally manage & monitor the power supply.
  • Ethernet Ports

    The 2 provided Ethernet ports allow for maximum flexibility: one port can be used as wired uplink while the other port serves as LAN access for other wired devices. Each Ethernet port comes with a smart uplink detection to automatically determining whether a port should be uplink or provide LAN access.
  • Mounting Options

    Regardless where to place the Access Points – on a wall, ceiling grid, pole, outdoors – the installer kit included with every Access Point facilitates the installation. Easily pluggable mounting options got you covered for every scenario.
Radio Chains / Streams2.4 GHz : 2x2
5 GHz : 2x2
Antennas2.4 GHz : 5.0 dBi
5 GHz : 5.0 dBi
Data Rates573 Mbps + 1201 Mbps
2.4 GHz2 stream, 802.11 b/g/n/ax (max rate: 574 Mbps), MU-MIMO/OFDMA
5 GHz2 stream, 802.11 a/n/ac/ax (max rate: 1201 Mbps), MU-MIMO/OFDMA
ProcessorQualcomm Cypress IPQ6000
Memory256 MB DRAM DDR3
64 MB NOR Flash
Watchdog TimerMicrochip PIC10F200T-I/OT
Physical Interface2x 1000 Mbps Ethernet ports
PoE802.3at
DC Jack12V / 2A
Power ConsumptionMin : 5W (PoE), 3.5W (DC)
Max : 13W
Max Recommended Clients100-110 per AP
Indoor/Outdoor Rating
CE marked for indoor/outdoor use, IP55
Dimension (W x D x H)180 x 180 x 37 mm
Weight500 g
Operating Temperature0°C ~ 40°C (32°F ~ 104°F)
CertificationsCE, FCC, IC, RCM