PA300 Access Point

  • Rear picture of Plasma Cloud's PA300/PA300E WiFi Access Point.
  • Side picture of Plasma Cloud's PA300/PA1200 WiFi Access Point.
  • Top picture of Plasma Cloud's PA300/PA1200 WiFi Access Point.
  • Bottom picture of Plasma Cloud's PA300 WiFi Access Point.
  • Mounting options picture for Plasma Cloud's PA300/PA1200 WiFi Access Point.

Key features:

  • 2.4 GHz 802.11n WiFi
  • Zero config, plug-and-play networking
  • Free cloud-based web console for complete management
  • Water and dust resistant with an IP55 rating
  • Universal installation kit included

  • PA300

    Plasma Cloud’s low cost solution providing single band dual stream 2.4GHz 802.11n WiFi in a weather resistant housing. Your best choice if the budget is a concern or for large WiFi sensor deployments.
  • Power over Ethernet (PoE)

    Power over Ethernet (PoE) allows to supply a device with power and data over a single Ethernet cable connection. This reduces installation cost and effort for locations without available power lines. Furthermore, when connected to a Plasma Cloud PoE switch, PoE allows to centrally manage & monitor the power supply.
  • Ethernet Ports

    The 2 provided Ethernet ports allow for maximum flexibility: one port can be used as wired uplink while the other port serves as LAN access for other wired devices. Each Ethernet port comes with a smart uplink detection to automatically determining whether a port should be uplink or provide LAN access.
  • Mounting Options

    Regardless where to place the Access Points – on a wall, ceiling grid, pole, outdoors – the installer kit included with every Access Point facilitates the installation. Easily pluggable mounting options got you covered for every scenario.
Radio Chains / Streams2.4 GHz : 2x2
Antennas2.4 GHz : 3.0 dBi
Data Rates300 Mbps
2.4 GHz2 stream, 802.11 b/g/n (max rate: 300 Mbps)
ProcessorQualcomm Honeybee QCA9531
Memory64 MB
Physical Interface2 x 100 Mbps Ethernet ports
PoE24V passive PoE
802.3af / 802.3at
DC Jack12-24V / 1A
Power ConsumptionMin : 3W
Max : 9W
Max Recommended Clients50 per AP
Indoor/Outdoor Rating
CE marked for indoor/outdoor use, IP55
Dimension (W x D x H)142 x 142 x 34 mm
Weight470 g
Operating Temperature0°C ~ 40°C (32°F ~ 104°F)
CertificationsCE, FCC, IC, RCM